VetSpecs® CM5

Capnography and Multigas Monitoring System

6.75 x 4.5 x 1.75 inches (170 x 115 x 45 mm), 1.2 lbs. (0.54 kg), 5.6” HD screen

Comprehensive Capnography Monitoring

Based on the VetSpecs® Flex™ modular display platform, as shown above, the CM5 features the following modules, each best suitable for use in surgery, dentistry, procedural sedation, intubation, pre-op preparation, anesthetic recovery, emergency, critical care, and/or transport.

  • Side-stream Capnography Module
  • Side-stream Capnography and Multigas Module
  • VetSpecs® Capno-M

The VetSpecs® Capno-M can be used independently, or connected wirelessly to the display platform for enhanced performance. For more information, please refer to the VetSpecs® Capno-M page.

VetSpecs® Capno-M

Side-stream Module

If you equip your CM5 with both the Capno-M and a side-stream module, as shown above, you can simultaneously monitor two patients if necessary, for example, use the Capno-M separately to monitor one patient in surgery, pre-op preparation, or anesthetic recovery, while use the side-stream module with the display platform to monitor another patient in dentistry or surgery at the same time.

When connected with the Capno-M or the side-stream capnography module, the CM5 displays the following information, with a respiratory sound, and saves all registered waveforms, readings, and trend graphics on a USB flash drive for digital documentation and printing out a monitoring report.

  • CO2 Waveforms
  • End-tidal CO2 (EtCO2)
  • Respiratory Rate (RR)
  • Fractional Inspired CO2 (FiCO2)
  • Trend Graphics for EtCO2 and RR

Multigas Monitoring

With the capnography and multigas module, the CM5 monitors one of the five anesthetic gas agents (Sevoflurane, Isoflurane, Halothane, Desflurane, or Enflurane), pre-selected by the user in the menu, and displays the inspiration and expiration concentration values of the selected anesthetic agent, in addition to the capnography monitoring.

You may purchase the CM5 initially with only the side-stream capnography module or the Capno-M, and later at any time, add the other, or trade up for the capnography and multigas module.

Upgradeable for Multiparameter Monitoring

Multi-parameter Mode

As part of the VetSpecs® Flex™ Modular Monitoring System, the CM5 is compatible with the Main Module containing ECG, pulse oximetry, and temperature. To upgrade your CM5 for multiparameter monitoring, simply purchase the Main Module as shown below. Upon connecting with the Main Module, the CM5 enters the multi-parameter mode, as shown above, displaying ECG, pulse waveforms, CO2 waveforms, a heart rate, a temperature, a pulse rate, a SpO2 reading, an EtCO2 reading, a FiCO2 reading, and a respiratory rate, with a heartbeat sound and a respiratory sound.

Optional Main Module
(118 x 100 x 25 mm, 4.65 x 3.94 x 0.98 inches)

VetSpecs® Showcase - CM5